Ignorer et passer au contenu
  1. FREE SHIPPING ON ORDERS OVER $199!

SAVE TIME ON YOUR ANNUAL WHEEL-END INSPECTION

TMC RP631C calls for a Level 2 wheel-end inspection annually or at 100,000 miles.

Use the calculator below to estimate the technician hours and labor value your fleet could reclaim with The Xtractor hub cap.

TMC RP631C

Recommendations for Wheel End Lubrication. 

Read the RP

YOUR FLEET

Calculated Wheel-Ends 100
Per technician hour

ANNUAL INSPECTION & SERVICE

Based on 100 wheel-ends inspected once per year
Conventional Inspection / Service Hours
66.7 HRS
Xtractor Inspection / Service Hours
8.3 HRS
Annual Inspection / Service Hours Saved
58.3 HRS
ESTIMATED ANNUAL LABOR SAVINGS $8,750 Inspection / service hours saved × shop labor rate

Fewer inspection and service hours. More time for the work that matters.

Estimates assume one annual lubricant inspection/service per calculated wheel-end. Conventional time defaults to 40 minutes and is adjustable; Xtractor HexThread® cartridge time is modeled at five minutes per wheel-end. The comparison covers lubricant access and hub cap service; other required wheel-end checks and any corrective repairs remain part of the inspection. Actual times and billed savings vary by technician, wheel-end condition, shop practices and billing model.

START SAVING IN YOUR FLEET

Contact our fleet sales specialists to review this and several other ways The Xtractor can cut costs in your fleet.

CONTACT FLEET SPECIALIST